Sand and stone chips — the volume-bulk of every m³ of concrete.
sand & aggregates prices in Dehradun, Uttarakhand, sourced from dealer networks and leading online marketplaces. Ranges reflect the spread between authorised-dealer bulk rates and retail single-unit rates. Prices are 3 % above the 50-city national average — a transport/logistics premium drives the spread against quarry-proximate cities.
| Item | Unit | Price in Dehradun |
|---|---|---|
| River Sand | per tonne | ₹2,478 ₹2,124–2,832 (dealer-to-retail) |
| M-Sand (Manufactured) | per tonne | ₹1,652 ₹1,416–1,888 (dealer-to-retail) |
| Plastering Sand (P-Sand) | per tonne | ₹1,888 ₹1,652–2,124 (dealer-to-retail) |
| Coarse Aggregate 20mm | per tonne | ₹1,534 ₹1,298–1,770 (dealer-to-retail) |
| Coarse Aggregate 40mm | per tonne | ₹1,416 ₹1,180–1,652 (dealer-to-retail) |
| Stone Dust / Crusher Dust | per tonne | ₹885 ₹708–1,062 (dealer-to-retail) |
| Coarse Aggregate 10mm10mm stone· inferred from brand premium | per tonne | ₹1,565 ₹1,324–1,805 (dealer-to-retail) |
| Boulder Soling (40mm+)40mm+· inferred from brand premium | per tonne | ₹1,246 ₹1,038–1,454 (dealer-to-retail) |
| Graded Sub-Base (GSB)GSB Grade 1· inferred from brand premium | per tonne | ₹1,204 ₹1,003–1,404 (dealer-to-retail) |
| Stone Chips 6mm6mm· inferred from brand premium | per tonne | ₹1,611 ₹1,363–1,859 (dealer-to-retail) |
| Kadappa Aggregatepolished· inferred from brand premium | per tonne | ₹1,841 ₹1,558–2,124 (dealer-to-retail) |
Supply. Dehradun is fed by Himachal/UP cement plants, Mandi Gobindgarh and UP TMT, and Shivalik-foothill river-bed aggregate from the Ganga/Yamuna tributaries. For sand & aggregates specifically, this places Dehradun on the higher side of the national cost band — the page's table reflects 3 % above the 50-city national average.
What moves the local price. hill-and-foothill terrain raises haulage on heavy materials; Uttarakhand's tightening river-bed mining controls and eco-sensitive-zone restrictions are the main upward pressure on aggregate.
Buyer takeaway. foothill river-bed aggregate is locally available but increasingly regulated, so fine-aggregate rates have been climbing; cement and steel carry a modest hill-haulage premium over the Punjab/UP plains. Cross-check the sand & aggregates ranges in the table above against a live local quote before raising a purchase order — the spread between bulk-dealer and retail rates in Dehradun, Uttarakhand is wider than the table's midpoint suggests.
Fine and coarse aggregates per IS 383:2016 together occupy 60-75 % of the volume of concrete. Fine aggregate (sand) is either river sand (natural) or manufactured sand (M-sand, produced by crushing stone). Coarse aggregates are graded stone chips — 10 mm, 20 mm, and 40 mm nominal sizes are standard. For a typical M20 mix, each m³ of concrete needs ~0.45 m³ of sand and ~0.9 m³ of 20 mm coarse aggregate. Quality matters: silt content, water absorption, flakiness, and grading all feed into mix design per IS 10262. Most Indian cities have banned mechanised river-sand extraction since 2013-2016, making M-sand the default for RCC.
Aggregate prices in India vary wildly by proximity to a quarry — coastal and hilly cities pay 2-3× the quarry-gate price due to transport. M-sand has overtaken river sand as the default in south India since 2020; north India and east India still lean on river sand where legally extracted. 2024-25 saw ~8-12 % price rise on diesel cost inflation and stricter mining enforcement. Kerala and the north-east remain the most expensive regions due to haul distance.
Week-by-week sand & aggregates price charts for Dehradun will appear here once our weekly price tracker accumulates 4+ weeks of snapshots. Subscribe to the InfraLens WhatsApp channel to be notified.
Compare sand & aggregates prices in Dehradun with other Indian metros. Prices shown are for Coarse Aggregate 20mm (per tonne) — a representative benchmark for the category. Click any city for the full 11-item price list.
Sand & Aggregates quality and manufacturing in India is governed by the following Indian Standards. Click any code for the full specification with extracted clauses, tables, and reference values.
IS 383:2016: Coarse and fine aggregate for concrete. IS 2386:1963: Methods of test for aggregates (part 1-8).