TMT rebar is ~25-35 % of a building's structural cost — price swings of 5 % hit the project BOQ hard.
steel & rebar prices in Delhi NCR, Delhi, sourced from dealer networks and leading online marketplaces. Ranges reflect the spread between authorised-dealer bulk rates and retail single-unit rates. Prices are 3 % above the 50-city national average — a transport/logistics premium drives the spread against quarry-proximate cities.
| Item | Unit | Price in Delhi NCR |
|---|---|---|
| TMT Bar 8mm (Fe500D) | per kg | ₹65 ₹62–68 (dealer-to-retail) |
| TMT Bar 10mm (Fe500D) | per kg | ₹64 ₹61–67 (dealer-to-retail) |
| TMT Bar 12mm (Fe500D) | per kg | ₹63 ₹60–66 (dealer-to-retail) |
| TMT Bar 16mm (Fe500D) | per kg | ₹62 ₹59–65 (dealer-to-retail) |
| TMT Bar 20mm (Fe500D) | per kg | ₹62 ₹59–65 (dealer-to-retail) |
| TMT Bar 25mm (Fe500D) | per kg | ₹62 ₹59–65 (dealer-to-retail) |
| Structural Steel (ISMB/ISMC) | per kg | ₹72 ₹68–75 (dealer-to-retail) |
| MS Plate (6-12mm) | per kg | ₹69 ₹65–72 (dealer-to-retail) |
| Binding Wire (18 gauge) | per kg | ₹62 ₹58–65 (dealer-to-retail) |
| Tata Tiscon Fe 500D 8mmTata TisconFe 500D 8mm· inferred from brand premium | per kg | ₹70 ₹66–73 (dealer-to-retail) |
| Tata Tiscon Fe 500D 10mmTata TisconFe 500D 10mm· inferred from brand premium | per kg | ₹69 ₹65–72 (dealer-to-retail) |
| Tata Tiscon Fe 500D 12mmTata TisconFe 500D 12mm· inferred from brand premium | per kg | ₹68 ₹64–71 (dealer-to-retail) |
| Tata Tiscon Fe 500D 16mmTata TisconFe 500D 16mm· inferred from brand premium | per kg | ₹67 ₹63–70 (dealer-to-retail) |
| JSW Neosteel 500D 10mmJSW NeosteelFe 500D 10mm· inferred from brand premium | per kg | ₹67 ₹64–70 (dealer-to-retail) |
| JSW Neosteel 500D 12mmJSW NeosteelFe 500D 12mm· inferred from brand premium | per kg | ₹66 ₹63–69 (dealer-to-retail) |
| JSW Neosteel 500D 16mmJSW NeosteelFe 500D 16mm· inferred from brand premium | per kg | ₹65 ₹62–68 (dealer-to-retail) |
| SAIL SeQR 10mmSAILFe 500D 10mm· inferred from brand premium | per kg | ₹65 ₹62–68 (dealer-to-retail) |
| SAIL SeQR 12mmSAILFe 500D 12mm· inferred from brand premium | per kg | ₹64 ₹61–67 (dealer-to-retail) |
| Vizag Steel 12mmVizag SteelFe 500D 12mm· inferred from brand premium | per kg | ₹64 ₹61–67 (dealer-to-retail) |
| Kamdhenu Nxt 10mmKamdhenuFe 500D 10mm· inferred from brand premium | per kg | ₹64 ₹61–67 (dealer-to-retail) |
| Kamdhenu Nxt 12mmKamdhenuFe 500D 12mm· inferred from brand premium | per kg | ₹63 ₹60–66 (dealer-to-retail) |
| Jindal Panther 10mmJindal PantherFe 500D 10mm· inferred from brand premium | per kg | ₹67 ₹64–70 (dealer-to-retail) |
| Jindal Panther 16mmJindal PantherFe 500D 16mm· inferred from brand premium | per kg | ₹65 ₹62–68 (dealer-to-retail) |
Supply. Delhi-NCR draws cement from Rajasthan's Nimbahera–Chittorgarh belt and Madhya Pradesh's Satna cluster (300–600 km haul), TMT bars from Mandi Gobindgarh (Punjab) secondary mills and Rajasthan rolling mills, and stone aggregate from the Aravalli quarries around Pali and Rewari. For steel & rebar specifically, this places Delhi NCR on the higher side of the national cost band — the page's table reflects 3 % above the 50-city national average.
What moves the local price. the National Capital Region runs India's densest concentration of metro, expressway, and government-housing work, so demand spikes are routine; the NGT ban on Yamuna and Aravalli river-sand mining has pushed most sites onto Rajasthan M-sand and crushed-stone fines, lifting fine-aggregate rates 20–35% above quarry-proximate cities.
Buyer takeaway. NCR rates carry a persistent logistics premium because no cement plant or major quarry sits inside the region — bulk buyers should compare ex-Bhiwadi and ex-Sonipat stockist quotes, which often beat in-city retail by 8–12%. Cross-check the steel & rebar ranges in the table above against a live local quote before raising a purchase order — the spread between bulk-dealer and retail rates in Delhi NCR, Delhi is wider than the table's midpoint suggests.
Reinforcement steel in India is manufactured per IS 1786:2008 (high-strength deformed bars for reinforced concrete) in grades Fe 415, Fe 500, Fe 500D, and Fe 550D — the letter 'D' indicates enhanced ductility required for seismic / IS 13920 structures in Zones III, IV, and V. Diameters range from 6 mm (binding wire) to 40 mm (heavy structural); the most-used residential sizes are 8, 10, 12, 16, and 20 mm. TMT (Thermo-Mechanically Treated) bars are the universal standard, replacing older cold-twisted deformed (CTD) bars completely by 2008. Structural-grade steel sections — ISMB, ISMC, ISA, ISHB — follow IS 808 and IS 2062, used in industrial frames, warehouses, and composite construction.
TMT prices spiked to ₹85-95/kg in 2022 during the Russia-Ukraine energy shock, then softened to ₹58-68/kg through 2024 as Chinese oversupply and weakened global demand pushed prices down. Q1 2026 has seen prices range ₹60-72/kg depending on brand and region, with premium brands (Tata Tiscon, JSW) trading at a 5-8 % premium over secondary mills. Prices are expected to firm up in the latter half of 2026 if the anti-dumping duty on Chinese cold-rolled steel is extended.
Week-by-week steel & rebar price charts for Delhi NCR will appear here once our weekly price tracker accumulates 4+ weeks of snapshots. Subscribe to the InfraLens WhatsApp channel to be notified.
Compare steel & rebar prices in Delhi NCR with other Indian metros. Prices shown are for TMT Bar 12mm (Fe500D) (per kg) — a representative benchmark for the category. Click any city for the full 23-item price list.
Steel & Rebar quality and manufacturing in India is governed by the following Indian Standards. Click any code for the full specification with extracted clauses, tables, and reference values.
IS 1786:2008: High-strength deformed bars and wires for concrete. IS 432:1982: Mild steel and medium tensile steel bars.